Raymarine Backbone Cables SeaTalk NG thermals With minimal hardware and streamlined

With minimal hardware and streamlined features this smock was designed to fit close to the body and worn over a PFD for minimal aero interference

19mmØ x 52mm exposed length (Plug 3/4" BSPT thread)

Marine Town® Dual Pivot Hinge - Cast Stainless Steel Twin pivot pins with link plate

or whether you should head back to shore or summon help immediately

CMSGVT569Z - This BP-1185 anode is used for a Vetus Bow Thruster 60

Raymarine Backbone Cables SeaTalk NG thermals With minimal hardware and streamlinedIn a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Cable