Forster - Ultra Micrometer Seater Die Crossbolt Our benchrest brushes are made

Our benchrest brushes are made with brass or aluminum core wire that is fashioned into a loop at the top

This tool uses a universal shellplate which will accept virtually any case from the tiny 32 ACP to the large 45-70 Government

Most commercially available brass has variances in the case neck thickness

This handloader can then measure the changes between fired and sized brass

a thin film of gun grease stays where it is placed

Forster - Ultra Micrometer Seater Die Crossbolt Our benchrest brushes are madeThe Ultra Micrometer Seater Die is a non crimping style seater die (except for the 30 30) that holds the bullet and case in perfect alignment while the bullet is press fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it, simply adjust the Micrometer stem up or down to the desired depth and the cartridge will be exactly the length you need.