Tork Craft | Drill Bit HSS Standard 4,8mm Packet of 10 Makita_Drill 1st gear/2nd gear: 0 -

1st gear/2nd gear: 0 - 430/0 - 1300min⁻¹

The pocket clip also prevents the tool from rolling off the bench

Or finely sand wood

plane irons and wood chisels where a minimum of steel removal is needed and a superior surface finish is required

The grain is bonded to the E-paper backing with a strong synthetic resin

Tork Craft | Drill Bit HSS Standard 4,8mm Packet of 10 Makita_Drill 1st gear/2nd gear: 0 -The drill bit is made from HSS (hi speed steel) and is roll forged. Standard HSS 118 angle point drill bits are designed as an all purpose drill bit and it will drill into steel, non ferrous metals and plastic. Sharpening The drill bits are re sharpenable several times. We recommend the following machines to sharpen the HSS standard drill bits: Drill Doctor 360X Diameter range of 2,5mm 13mm Drill Doctor 500X Diameter range of 2,4mm 13mm (19mm