K&M - Controlled Depth Reamer Size:6mm-338 cal exposed turrets with a zero

exposed turrets with a zero stop ring

This means that you will be able to train by simply using a paper target or a standard target installation

When you use ADI’s cases you will achieve optimal performance and consistency every time

and other such experts

consistency and high performance they demand

K&M - Controlled Depth Reamer Size:6mm-338 cal exposed turrets with a zeroThe K&M case mouth chamfer tool cuts a shallow angle chamfer on the inside of the case neck for smooth bullet seating while controlling the depth of cut with stop fingers that register on the case mouth which insures each case has the same depth chamfer. The chamfer angle is 4 degrees per side. The tool also incorporates a pilot pin that guides through the flash hole of the cartridge to maintain the tool on the centerline of the cartridge for an even